Install Help [G-SYNC Upgrade Kit]
Re: Install Help [G-SYNC Upgrade Kit]
The white ribbon, you mean? If so, I'll go try reseating it. Hopefully the monitor is easier to open the second time around...
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: Install Help [G-SYNC Upgrade Kit]
Yes, the cable that connects between the circuit board and the LCD.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: Install Help [G-SYNC Upgrade Kit]
Just reseated it and it's still happening.
Should I try not sliding it back to lock it? The instructions make no mention of that.
Should I try not sliding it back to lock it? The instructions make no mention of that.
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: Install Help [G-SYNC Upgrade Kit]
Let me wait for a response from NVIDIA. They are real busy, so a bit slow at replying, but this is important info to find out.PiERiT wrote:Just reseated it and it's still happening.
Should I try not sliding it back to lock it? The instructions make no mention of that.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: Install Help [G-SYNC Upgrade Kit]
I haven't noticed any rainbow banding on mine, though I haven't tried any games yet. I'm about to boot up Far Cry 3 though.
For the brown connector for the blue-tipped ribbon cable, I followed the instructions in the manual: Use the round end of the prying tool to unlock the connector. After this, I just pushed the cable into it and it popped open really easily.
For the brown connector for the blue-tipped ribbon cable, I followed the instructions in the manual: Use the round end of the prying tool to unlock the connector. After this, I just pushed the cable into it and it popped open really easily.
Re: Install Help [G-SYNC Upgrade Kit]
Hmm, what page is that on? My manual doesn't say anything like that for the ribbon step.nimbulan wrote:I haven't noticed any rainbow banding on mine, though I haven't tried any games yet. I'm about to boot up Far Cry 3 though.
For the brown connector for the blue-tipped ribbon cable, I followed the instructions in the manual: Use the round end of the prying tool to unlock the connector. After this, I just pushed the cable into it and it popped open really easily.
Re: Install Help [G-SYNC Upgrade Kit]
Oh I was using the updated PDF guide since it has some extra information. They tell you to use the rounded end of the prying tool to unlock the connector on step 31.PiERiT wrote:Hmm, what page is that on? My manual doesn't say anything like that for the ribbon step.nimbulan wrote:I haven't noticed any rainbow banding on mine, though I haven't tried any games yet. I'm about to boot up Far Cry 3 though.
For the brown connector for the blue-tipped ribbon cable, I followed the instructions in the manual: Use the round end of the prying tool to unlock the connector. After this, I just pushed the cable into it and it popped open really easily.
I was able to produce the rainbow bands on my monitor while testing Far Cry 3. It happened once out of at least 20 various game boots, alt+tabs, and renderer reinitializations due to changing graphics settings.
Re: Install Help [G-SYNC Upgrade Kit]
Bah, I had no idea there was an updated guide. That would have saved a lot of time.
I've mainly been using BF4 and Metal Gear Rising to test the rainbow thing. it happens more often than not.
I've mainly been using BF4 and Metal Gear Rising to test the rainbow thing. it happens more often than not.
Re: Install Help [G-SYNC Upgrade Kit]
I had it happen when starting up Saints Row 4 as well. It must be normal.PiERiT wrote:Bah, I had no idea there was an updated guide. That would have saved a lot of time.
I've mainly been using BF4 and Metal Gear Rising to test the rainbow thing. it happens more often than not.
-
- Posts: 111
- Joined: 31 Dec 2013, 15:20
Re: Install Help [G-SYNC Upgrade Kit]
Okay, here is a GREAT kicker for everyone. Getting my GSync installed now and My monitors are going crazy...
GSync
Dell 24" IPS
It has to be my GPU... SLI GTX 670's. All my connectors are seated properly on the monitor. I've torn it apart twice looking for a problem.
Other than that, I can't get BF4 to launch either. It launches and then goes to 'No Input Detected' and then crashes BF4.
GSync
Dell 24" IPS
It has to be my GPU... SLI GTX 670's. All my connectors are seated properly on the monitor. I've torn it apart twice looking for a problem.
Other than that, I can't get BF4 to launch either. It launches and then goes to 'No Input Detected' and then crashes BF4.
Asus VG248QE with GSync. Blur Busters GSync Contest Winner.