[FIXED] BenQ XL2720Z Firmware V4

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Post Reply
Cedric123456789
Posts: 3
Joined: 20 May 2017, 09:22

[FIXED] BenQ XL2720Z Firmware V4

Post by Cedric123456789 » 20 May 2017, 09:31

Hello,
Sorry for my english. i am french ...
I look V4 firmware for XL2720Z download, the lastest firmware V5 bug, constant black screen in game, 3D mode ...
Thanks :)

Bonjour,
je cherche le firmware V4 pour l'écran XL2720Z en téléchargement, le dernier firmware V5 bug, j'ai des écran noir dans le jeux en mode 3d ..
merci :)
Last edited by Cedric123456789 on 26 May 2017, 19:05, edited 1 time in total.

Falkentyne
Posts: 2793
Joined: 26 Mar 2014, 07:23

Re: BenQ XL2720Z Firmware V4

Post by Falkentyne » 20 May 2017, 10:39

Hello,
There is no such bug in V5.

If you flashed the firmware yourself or if you just bought the monitor, if you are using "Blur reduction" with a "Vertical Total 1500" or "VT 1350" tweak, you may wind up with a black screen if the Strobe Phase is higher than 049 (120hz) or 059 (100hz). To fix this, set the strobe phase to 000. This is because after a "recall/reset all", the strobe phase defaults to "100", as this is Benq's default for trying to reduce input lag by up to 1 frame (a high strobe phase doesn't work with Vertical Total tweaks). This is easy to fix.


1) power off (do NOT unplug; unlock codes only work after a "soft" power off, not AC power off).
2) hold button #4 for 5 seconds, then press the power button.
3) keep button #4 pressed until the screen appears. If you do *NOT* get the "Logo" window, you did it correct. If you did get the Benq/Zowie logo screen, you didn't do it correctly.

Then 4: press button #4 to enter the service menu and change the strobe phase.

Cedric123456789
Posts: 3
Joined: 20 May 2017, 09:22

Re: BenQ XL2720Z Firmware V4

Post by Cedric123456789 » 24 May 2017, 19:46

Hello,
Great!!, I'm going to try ... thanks for help ... :)

Cedric123456789
Posts: 3
Joined: 20 May 2017, 09:22

Re: [FIXED] BenQ XL2720Z Firmware V4

Post by Cedric123456789 » 26 May 2017, 19:07

it works ...
Thanks ..

Post Reply