Can any XL2546 owners who have current AMD video cards (290X or newer please) please DISABLE DyAc (benq blur reduction) in the service menu and then tell me if FREESYNC becomes available in the AMD settings after power cycling the monitor?
Service menu: Power off, hold button#4 for 5 seconds, power on while holding button 4, then release when a screen appears.
Press button 4 to enter the service menu and disable DyAc.
Then power cycle the monitor.
XL2546 owners + AMD video cards
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: XL2546 owners + AMD video cards
P.S. It's my understanding that Blur Busters Strobe Utility 2.0 can allow you to turn on/off DyAc without needing to access Factory Menus.
1. Launch Strobe Utility 2.0 (or later)
2. Disable the "Enable Strobe" checkbox
3. Quit Strobe Utility
4. Power cycle your monitor.
5. See if FreeSync becomes available.
While the "Enable Strobe" doesn't immediately enable strobing on early XL series, it apparently does on the XL2540/XL2546 series. So that saves trips to the Factory Menu.
1. Launch Strobe Utility 2.0 (or later)
2. Disable the "Enable Strobe" checkbox
3. Quit Strobe Utility
4. Power cycle your monitor.
5. See if FreeSync becomes available.
While the "Enable Strobe" doesn't immediately enable strobing on early XL series, it apparently does on the XL2540/XL2546 series. So that saves trips to the Factory Menu.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!