BenQ XL2720Z only showing 60fps in AlienInvasion Test?

[noblurfan]

Hi,

I did the VT1350 and adjusted my Nvidia control panel but seem to still have the browser test show it's only at 60fps?

Can I get some help in getting to show 120fps? Does that mean my monitor is not outputting 120fps or the Chrome browser is bugged?

Thanks.

[Chief Blur Buster]

This usually is the browser itself incorrectly detecting the refresh rate.
See http://www.testufo.com/browser.html for system requirements.

Can you verify that your Windows is not configured into Classic mode?

[noblurfan]

This usually is the browser itself incorrectly detecting the refresh rate.
See http://www.testufo.com/browser.html for system requirements.

Can you verify that your Windows is not configured into Classic mode?

Hey Chief! Thanks for stopping by and giving me some advice.

I was using Windows Classic mode but enabled an Aeros Window 7 theme and restarted.


I then installed the latest Firefox and Opera browsers and went to www.testufo.com
It still only shows 60fps as with the original chrome browser?







I checked my Nvidia control panel which shows 120fps setting is on.



I checked my Windows control panel display which also shows it should be running at 120fps.


Now I am confused as to what I am running? All 3 browsers show 60fps but my computer settings are 120fps.

Any further advice is appreciated. Thanks again.

[noblurfan]

http://forums.blurbusters.com/viewtopic.php?f=13&t=452

1920x1080p 120Hz, optimized for clearest motion, but very dim

Sharper & Clearer Than LightBoost=10%, but dimmer

1. First, do the "Vertical Total 1350" Tweak.
2. In Strobe Utility, enable "Override"
3. Set "Persistence" to 0.5ms
4. Set "Crosstalk" to first tick (3 clicks up)

Do you think it was because I used the strobe utility FIRST instead of doing the VT 1350?

Thanks.