BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

[Kiritox]

200 Hz at benq xl2430 with display port using s switch method

[ItsDyre]

Hello, I have an XL2411P, I tried all the methods mentioned in this thread but in vain.So, from what I read from all the other replies I need to have V002 firmware to overclock my monitor. I can't find any info on how to access the service menu for my monitor in order to check the firmware version. Could someone please help me with checking my firmware version and giving me any info on how to roll back to an earlier firmware version? If anybody has the same monitor and was able to overclock it, some help would be appreciated, I would like to get this monitor at 200hz.Thank you

My discord: Dyre#8008

[empty]

Hello, I overclocked my xl2411p through the display port to 200Hz without degrading the picture quality, and also keep the display scalling. 8 bit color works without artifacts.
The only problem that I could not overcome is non-working ama. Has anyone found a solution to this problem? I'm used to this setting and can't play without it.
Who could not overcome 150Hz on xl2411p - turn off the ama, save gamer preset and use OOR Buster by Chopper1337.

Here are my settings:
1280 960
24 3
32 5
80 10
136 18
1416 978

Can't do it!
Can you help?

Hello,
I can't go over 151hz with my XL2411P.
My firmware version 009.
Did anyone with version 009 made it over 151?
Also, i there any way to downgrade my firmware to version 2?
Thanks

[roca1337]

I cant seem to overclock my XL2411K to 165 / 180 hz even with oor booster it still says out of range anyone can help me with this situation?

[Schurkee]

XL2411P 200HZ Successful:
monitor settings:

- Blur reduction ON
- AMA OFF
- Instant mode ON
- Gamma 5
- Picture mode MOVIE or STANDARD Worked with both

[Cact_I]

maybe some one who has the ability could pull the working firmware off their xl2411p with an spi programmer or something similar

[elestopa]

I have achieved 220hz on my xl2411p, although after a while it has not been able to hold the stability. There is a small vertical glitch/gap a little to the right of the center of the screen, and the texts in that area look a bit strange.
https://photos.app.goo.gl/By86Ts856Eyog99R7
I keep testing
Testufo.... https://photos.app.goo.gl/5wgo9yTUPWoA51bo9
Config nvidia
https://photos.app.goo.gl/5KVsLv5S4WztaAZG9
The image is not very clear and I also have horizontal lines, besides, I don't know what I have done with cru that I have lost the 144hz resolution and I had to add a custom one. I'll go back to pass ddu and start over.
I have also forced the scaling on the screen and not on the gpu, the mouse movement feels smoother

[death5888]

Hi,
I'm not sure what happened, but I can't download softMCCS from the any of the links to download it.

Has it been deleted or something?
If so, is there any other way to download it?

[bishofz]

Hi,
I'm not sure what happened, but I can't download softMCCS from the any of the links to download it.

Has it been deleted or something?
If so, is there any other way to download it?

Having same issue too - can you maybe reupload it please? @Chief Blur Buster

[bishofz]

Hello HZ enthusiasts, I`m struggling with my XL2411P very much as of now, I can`t get past the Out of Range message and I have tried all the methods. AntiOOR says 0xCC = 2 and 0xDC = 21 . I couldn`t find Display application - 0xDC in softMCCS for some reason.

Im running on RX580, tried 180hz 200hz and 220hz with various timings: https://gyazo.com/656dbe32f0a32f7786e75046ffcda7c3

I have the same problem with my XL2411P. Guess we just have the wrong monitor or monitor software, although some people actually managed to get it to work on this monitor. I have 0xDC = 11 for my value , and I use a nvidia 1650 super. What’s your cpu? Just curious if it might be relayed to the problem..

When I tried with my XL2731 it gave me the same symptoms yours did, couldn’t get past the Out of Range. And I was using the same gpu 1650 Super that was in my brothers PC. So I’m starting to think it’s the gpu. I’m upgrading my pc so when I’m finished I’ll try it with my 970 and see if I can make it work.

Did you manage to solve this - I can't get past 164hz - SoftMCCS ist not downloadable anymore.