Page 16 of 16
Re: New Zowie Monitor 540Hz XL2586X
Posted: 19 Feb 2025, 16:39
by daviddave1
https://www.testufo.com/frameskipping does not seem to work on 500 or 540hz? Cant get the status on Green/Ready? Chrome and Firefox? I get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" it works on 360hz.
Re: New Zowie Monitor 540Hz XL2586X
Posted: 19 Feb 2025, 16:59
by daviddave1
MSIfanboy wrote: ↑18 Jan 2025, 06:24
i did get 540hz HDMI 2.1 working with no DSC, alt tab
not sure if changing 32gbps to 48gbps did anything
disabled dsc, chose 500 EDID in benq monitor
i have a 48gbps hdmi 2.1 (not zowies one) unsure if that changes anything
made a custom cru refresh
im not actually sure how high i can go with pixel clock in zowie, and i dont really wanna mess up new 1000 USD monitor
it def doesnt overclock, do not ret above 540hz, i had to use another monitor to get into CRU in windows to reset/change it
Nice 540hz on 500hz mode works. using standard hdmi 2.1 cable with your settings! ty!
It also worked without changing 32gbps to 48gbps or enabling Fast Vactiv.
Can u check if
https://www.testufo.com/frameskipping works? Cant get the status on Green/Ready? Chrome and Firefox? I could net get it to work also before the overclock. I get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps"
it works on 360hz.
Re: New Zowie Monitor 540Hz XL2586X
Posted: 07 Mar 2025, 21:53
by witega
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
Re: New Zowie Monitor 540Hz XL2586X
Posted: 08 Mar 2025, 16:52
by daviddave1
witega wrote: ↑07 Mar 2025, 21:53
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
tnx. i tried edge too. unfortunate still get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" error
Re: New Zowie Monitor 540Hz XL2586X
Posted: 10 Mar 2025, 07:32
by witega
daviddave1 wrote: ↑08 Mar 2025, 16:52
witega wrote: ↑07 Mar 2025, 21:53
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
tnx. i tried edge too. unfortunate still get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" error
If "Efficiency Mode" disabled in Edge settings?
Re: New Zowie Monitor 540Hz XL2586X
Posted: 12 Mar 2025, 19:51
by daviddave1
witega wrote: ↑10 Mar 2025, 07:32
daviddave1 wrote: ↑08 Mar 2025, 16:52
witega wrote: ↑07 Mar 2025, 21:53
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
tnx. i tried edge too. unfortunate still get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" error
If "Efficiency Mode" disabled in Edge settings?
yes weird huh. also tried it with gsync on. 480hz, 360hz is stable for 2 seconds then a stutter warning also in kiosk mode.
Unfortunately 499hz and 540hz gives the same error as before. Also after factory reset monitor.
240hz remains stable longer. i think its my ddr5 mem .
do u use dp 1.4 or hdmi 2.1 cable?
shall i rma the monitor?
I had it fixed by zowie last month cause I had a green line across the screen that would not go away. maybe its damaged somehow?
Re: New Zowie Monitor 540Hz XL2586X
Posted: 13 Mar 2025, 00:07
by daviddave1
witega wrote: ↑10 Mar 2025, 07:32
daviddave1 wrote: ↑08 Mar 2025, 16:52
witega wrote: ↑07 Mar 2025, 21:53
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
tnx. i tried edge too. unfortunate still get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" error
If "Efficiency Mode" disabled in Edge settings?
*Edit i used the dp 1.4 cable now instead of the hdmi 2.1 and 360hz remains stable. 540 hz works too for almost 10 seconds. Then a stutter warning. Do you get this too sometimes?
Edit 3 the framerate in hdmi 2.1 drops to 537 so i made a custom res with 537 hz. Now it remains stable for arround 10 secs then a potential browser stutter occures. Do u have this also?
Re: New Zowie Monitor 540Hz XL2586X
Posted: 16 May 2025, 21:24
by MSIfanboy
daviddave1 wrote: ↑13 Mar 2025, 00:07
witega wrote: ↑10 Mar 2025, 07:32
daviddave1 wrote: ↑08 Mar 2025, 16:52
witega wrote: ↑07 Mar 2025, 21:53
Don't have Chrome or Firefox, but it does work on Microsoft Edge which is Chromium based iirc
tnx. i tried edge too. unfortunate still get the "Sync Failure unable to Vsync error. Try closing all tabs an all aps" error
If "Efficiency Mode" disabled in Edge settings?
*Edit i used the dp 1.4 cable now instead of the hdmi 2.1 and 360hz remains stable. 540 hz works too for almost 10 seconds. Then a stutter warning. Do you get this too sometimes?
Edit 3 the framerate in hdmi 2.1 drops to 537 so i made a custom res with 537 hz. Now it remains stable for arround 10 secs then a potential browser stutter occures. Do u have this also?
just use pursuitfrog, you can even screenshot the ufo in fullscreen and use that in pursuitfrog