Symptoms are input lag, desync, faulty sensitivity, bad hitreg ,choppey& blurry picture.
Here are my findings. Please if you have any , don't hesitate to share! , this post will be updated if i discovered any new methods
1- using the correct power cord for your country voltage.
2- i found that using wired controller to the pc or Xbox cause huge input lag and bad hitreg and a massive disadvantage and unbearable gameplay so i used bluetooth and instantly noticed my aim became snappier and responsive.
1#update . i unplugged every single usb device that is plugged but the appliance (could be pc ,smart tv , tv box , satellite receiver etc) . is turned off ( can you imagine !!!) and that gave me more responsiveness and aim preciseness.
#2update, for some unknown reason turning off (dmz& upnp) on router settings improves hitreg, responsiveness, aiming preciseness
#3update, turning the 2 prongs power plug of the router upsidedown made huge improvement in aiming and responsiveness but still not perfect 🥲
These methods gave a good playable gaming experience but not perfect. Please share your solutions if you have same symptoms and fixed it!
I need to hear everybody's experience if they have one or more of these symptoms,Thank you all.
Sharing my findings and possible solutions regarding these symptoms
Forum rules
IMPORTANT:
This subforum is for advanced users only. This separate area is for niche or unexpected lag issues such as electromagnetic interference (EMI, EMF, electrical, radiofrequency, etc). Interference of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction (ECC) latencies like a bad modem connection, except internally in a circuit. ECC = retransmits = lag. Troubleshooting may require university degree. Your lag issue is likely not EMI.
🠚 You Must Read This First Before Submit Post or Submit Reply
IMPORTANT:
This subforum is for advanced users only. This separate area is for niche or unexpected lag issues such as electromagnetic interference (EMI, EMF, electrical, radiofrequency, etc). Interference of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction (ECC) latencies like a bad modem connection, except internally in a circuit. ECC = retransmits = lag. Troubleshooting may require university degree. Your lag issue is likely not EMI.
🠚 You Must Read This First Before Submit Post or Submit Reply