Trying to understand what causes eyestrain for me.
Posted: 19 Nov 2026, 04:56
Hey guys, I got a new monitor (AOC AGON Pro CS24A 600Hz TN) and it's causing pretty bad eye strain, and I'm not sure what I should try before returning it.
My history regarding monitors:
Comfortable:
- BenQ Zowie XL2730 (144Hz 1440p TN) - my first high-Hz monitor, absolutely perfect if I remember correctly.
- BenQ Zowie XL2546K (240Hz TN) - perfectly comfortable too, used DyAc most of the time.
- BenQ Zowie XL2566X+ (400Hz TN) - bought this autumn, used it for about two months at 100% brightness with no eye strain. DyAc 2 does feel a tiny bit more tiring than having it off, but totally bearable for a few hours of gaming. Returned it to try the 600Hz CS24A.
- Alienware AW2720HF (27" 1080p 240Hz IPS, standard sRGB) - used as a secondary. Found it a bit dim and not quite at Zowie's level, maybe 85–90% as comfortable (a bit above the WOLED, still under the Zowie TNs), though fine overall.
- Apple screens (M4 Max MacBook Pro + Apple Studio Display) - I run both at max SDR brightness for work and don't really get this kind of eye fatigue.
Uncomfortable:
- Alienware AW2721D (27" 1440p 240Hz Nano IPS) - straining and tiring on the eyes, though still doable.
- Samsung 360Hz QD-OLED (27") - tested last year, very bad for my eyes. Felt way too dim for my liking, yet the colors looked "radioactive" / overly glowy. Returned it.
- ASUS 27" 480Hz WOLED - tested right after the Samsung. Pretty sure I had sRGB mode turned on, and eye-strain wise it was decent (still not quite as effortless as a BenQ or the AW2720HF, though I didn't use it for work so not much text reading). Returned it as well.
- AOC CS24A (600Hz TN) - got it yesterday and it completely wrecked my eyes with a persistent stinging / burning feeling.
A few extra details:
- I have astigmatism and hyperopia (farsightedness), not sure how much that factors in.
- On all the uncomfortable monitors, reds looked overly saturated (like the red YouTube logo in Chrome looking neon). On the CS24A in CS2, colors felt way more intense and sunlit areas on Mirage looked disturbingly bright.
- One weird thing on the CS24A: MBR+ acts like a secondary brightness boost — MBR 0 (off) is lower brightness, MBR 10 jumps noticeably higher, then it decreases again going toward 20.
- The CS24A OSD doesn't allow its built-in sRGB mode while MBR+ is enabled. I tried AMD's driver sRGB clamp (Custom Color on, Color Temp Control off) with MBR+/HDR/DCR off, and it made colors look dull while my eyes still stung (though my eyes were already irritated from the first session).
My current theories / assumptions:
1. Unmanaged wide color gamut on Windows: Every comfortable PC monitor I've owned is native sRGB (the Zowies and the AW2720HF), while my Apple displays are color-managed by macOS. Every uncomfortable PC monitor (AW2721D, QD-OLED, WOLED, CS24A) is wide gamut (~94%+ DCI-P3).
2. Backlight spectrum / KSF (PFS) red phosphor? I always suspected KSF on the AW2721D, and I'm wondering if the CS24A uses a KSF backlight too (couldn't find any published spectrum for it). Though if the Studio Display uses KSF and doesn't bother me, maybe KSF alone isn't it.
3. Aggressive MBR+ brightness/overdrive + high gamma/glare: Since DyAc already gives me slight fatigue, maybe the CS24A pushing higher peak brightness at MBR+ 10 (plus bright CS2 presets) pushed me way past my threshold.
4. Unit-specific issue like 600Hz pixel inversion flicker (planning to run Lagom and a slow-mo phone test on fresh eyes).
Has anyone else experienced this on the CS24A / AG246FK6, or knows what backlight/panel behavior it has? Before I return it, what settings or tests would you recommend trying (e.g., higher MBR+ 16-20 with lower brightness, or dialing back R.Saturation in the OSD)? And if I do return it, is there any 480Hz+ option that won't trigger this, or am I basically stuck going back to the XL2566X+?
---
TL;DR:
Got the AOC CS24A (600Hz TN) and it's giving me severe eye strain / burning.
- Good for my eyes: BenQ Zowie XL2730, XL2546K, XL2566X+ (best overall), M4 Max MacBook Pro & Apple Studio Display (max SDR brightness), Alienware AW2720HF (~85-90% comfort).
- Bad for my eyes: AOC CS24A (worst), Samsung 360Hz QD-OLED (nearly as bad, dim yet radioactive colors), Alienware AW2721D (tiring but doable), ASUS 480Hz WOLED (decent in sRGB, still below Zowie/AW2720HF).
- Main suspects: Unmanaged wide gamut on Windows (every comfortable Windows monitor was native sRGB), KSF backlight, and/or aggressive MBR+ brightness spikes. Looking for settings/tests to try before returning, or a 480Hz+ alternative that won't hurt my eyes.
- I mainly play competitive FPS when I game thus the crappy color TN is ok.
My history regarding monitors:
Comfortable:
- BenQ Zowie XL2730 (144Hz 1440p TN) - my first high-Hz monitor, absolutely perfect if I remember correctly.
- BenQ Zowie XL2546K (240Hz TN) - perfectly comfortable too, used DyAc most of the time.
- BenQ Zowie XL2566X+ (400Hz TN) - bought this autumn, used it for about two months at 100% brightness with no eye strain. DyAc 2 does feel a tiny bit more tiring than having it off, but totally bearable for a few hours of gaming. Returned it to try the 600Hz CS24A.
- Alienware AW2720HF (27" 1080p 240Hz IPS, standard sRGB) - used as a secondary. Found it a bit dim and not quite at Zowie's level, maybe 85–90% as comfortable (a bit above the WOLED, still under the Zowie TNs), though fine overall.
- Apple screens (M4 Max MacBook Pro + Apple Studio Display) - I run both at max SDR brightness for work and don't really get this kind of eye fatigue.
Uncomfortable:
- Alienware AW2721D (27" 1440p 240Hz Nano IPS) - straining and tiring on the eyes, though still doable.
- Samsung 360Hz QD-OLED (27") - tested last year, very bad for my eyes. Felt way too dim for my liking, yet the colors looked "radioactive" / overly glowy. Returned it.
- ASUS 27" 480Hz WOLED - tested right after the Samsung. Pretty sure I had sRGB mode turned on, and eye-strain wise it was decent (still not quite as effortless as a BenQ or the AW2720HF, though I didn't use it for work so not much text reading). Returned it as well.
- AOC CS24A (600Hz TN) - got it yesterday and it completely wrecked my eyes with a persistent stinging / burning feeling.
A few extra details:
- I have astigmatism and hyperopia (farsightedness), not sure how much that factors in.
- On all the uncomfortable monitors, reds looked overly saturated (like the red YouTube logo in Chrome looking neon). On the CS24A in CS2, colors felt way more intense and sunlit areas on Mirage looked disturbingly bright.
- One weird thing on the CS24A: MBR+ acts like a secondary brightness boost — MBR 0 (off) is lower brightness, MBR 10 jumps noticeably higher, then it decreases again going toward 20.
- The CS24A OSD doesn't allow its built-in sRGB mode while MBR+ is enabled. I tried AMD's driver sRGB clamp (Custom Color on, Color Temp Control off) with MBR+/HDR/DCR off, and it made colors look dull while my eyes still stung (though my eyes were already irritated from the first session).
My current theories / assumptions:
1. Unmanaged wide color gamut on Windows: Every comfortable PC monitor I've owned is native sRGB (the Zowies and the AW2720HF), while my Apple displays are color-managed by macOS. Every uncomfortable PC monitor (AW2721D, QD-OLED, WOLED, CS24A) is wide gamut (~94%+ DCI-P3).
2. Backlight spectrum / KSF (PFS) red phosphor? I always suspected KSF on the AW2721D, and I'm wondering if the CS24A uses a KSF backlight too (couldn't find any published spectrum for it). Though if the Studio Display uses KSF and doesn't bother me, maybe KSF alone isn't it.
3. Aggressive MBR+ brightness/overdrive + high gamma/glare: Since DyAc already gives me slight fatigue, maybe the CS24A pushing higher peak brightness at MBR+ 10 (plus bright CS2 presets) pushed me way past my threshold.
4. Unit-specific issue like 600Hz pixel inversion flicker (planning to run Lagom and a slow-mo phone test on fresh eyes).
Has anyone else experienced this on the CS24A / AG246FK6, or knows what backlight/panel behavior it has? Before I return it, what settings or tests would you recommend trying (e.g., higher MBR+ 16-20 with lower brightness, or dialing back R.Saturation in the OSD)? And if I do return it, is there any 480Hz+ option that won't trigger this, or am I basically stuck going back to the XL2566X+?
---
TL;DR:
Got the AOC CS24A (600Hz TN) and it's giving me severe eye strain / burning.
- Good for my eyes: BenQ Zowie XL2730, XL2546K, XL2566X+ (best overall), M4 Max MacBook Pro & Apple Studio Display (max SDR brightness), Alienware AW2720HF (~85-90% comfort).
- Bad for my eyes: AOC CS24A (worst), Samsung 360Hz QD-OLED (nearly as bad, dim yet radioactive colors), Alienware AW2721D (tiring but doable), ASUS 480Hz WOLED (decent in sRGB, still below Zowie/AW2720HF).
- Main suspects: Unmanaged wide gamut on Windows (every comfortable Windows monitor was native sRGB), KSF backlight, and/or aggressive MBR+ brightness spikes. Looking for settings/tests to try before returning, or a 480Hz+ alternative that won't hurt my eyes.
- I mainly play competitive FPS when I game thus the crappy color TN is ok.