Blur Busters Forums

Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™ Skip to content

Is this level of banding acceptable for pg278qr ?

Everything about displays and monitors. 120Hz, 144Hz, 240Hz, 4K, 1440p, input lag, display shopping, monitor purchase decisions, compare, versus, debate, and more. Questions? Just ask!

Is this level of banding acceptable for pg278qr ?

Postby TheRedBaron91 » 12 Sep 2018, 22:20

https://i.imgur.com/BL5wcX6.jpg

https://i.imgur.com/7FISuFQ.jpg

https://imgur.com/a/SvSQnCc

I just got this today, I know this is no color manipulation monitor, but I'm trying to figure out if I should rma this one. I just need to make sure I am not setting myself up to disappointment with another one, but this is getting a bit ridiculous.

Thanks again for any help! (the second picture is the black end of the colorbanding test, it loks fine overall, but you can absolutly 100% see the individual bars if you zoom in)

This will be like, the 5th monitor I have to RMA, ive both tried every monitor I though was worthy but ended up not being so, and 2 of this one... I think amaozn is still cool with it, but im not even sure if I can aspire to better colros at this point. For games, i kinda think I might have firugred out a solution, reshade seems to do the trick for colorbanding, but I cant find a solution for videos.
TheRedBaron91
 
Posts: 2
Joined: 12 Sep 2018, 22:11

Re: Is this level of banding acceptable for pg278qr ?

Postby notthatjesus » 14 Sep 2018, 14:49

The first photo looks a texture issue. Maybe streaming?

The visibly-segmented gradient, though, it looks almost identical to my pg278qr sorry to say. I think you may be falling into the same trap I did as someone who does a lot of video / image editing but also enjoys playing competitively on their free time: Wanting a monitor fantastic image quality and clarity, one which would ideally give you a competitive advantage (or at least give you the peace of mind that the playing field is leveled.)

Also, you didn't mention it, but in case you didn't know or were curious about, the yellowish tint is just the anti-glare coating. Unfortunately, the (TN) panels that PG278QR monitors come with just aren't ideal for color reproduction. However, a color calibration done with a cheap colorimeter and open source calibrating software for better accuracy does wonders for getting better balanced, more uniform colors.

- My two cents, hope it saves you an RMA or two
notthatjesus
 
Posts: 10
Joined: 24 Apr 2017, 20:48

Re: Is this level of banding acceptable for pg278qr ?

Postby TheRedBaron91 » 15 Sep 2018, 01:36

darn.

I reckon this is it then, huh? I have read that this is the best panel for TN color reproduction. Why is it so hard to find a decent display nowadays... if its not the VA panel ghosting its the TN color banding, or its the lack of good refresh rate.

When can w expect monitors with at least a decent ammount of everything? I cant look at this monitor for anything except videogames, because even youtube looks absolutly terrible, it essentially negates any resolution quality.
TheRedBaron91
 
Posts: 2
Joined: 12 Sep 2018, 22:11

Re: Is this level of banding acceptable for pg278qr ?

Postby notthatjesus » 15 Sep 2018, 02:49

While I agree that the colors are horrible at stock settings, they really are drastically better once you've got a custom color profile calibrated. I attached the calibration I did on my own monitor if you'd like some sort of reference. I used the FPS Mode monitor profile as stock with the following settings:

Brightness 80
Contrast 48
Saturation 44
Gamma 2.2
Color Temp. User R100 G91 B97

Calibration was done originally with brightness, contrast, and saturation all set to 50 and then tweaked to my own liking — a balance between a visually appealing image vs. accurate one (accurate color calibration alone produces a pretty flat, dull looking image). Also keep in mind that color reproduction varies from monitor to monitor, even if they are the same model, so it won't be as accurate as it is on my rig. Again, mostly just for reference

edit: File was too big
notthatjesus
 
Posts: 10
Joined: 24 Apr 2017, 20:48

Re: Is this level of banding acceptable for pg278qr ?

Postby RealNC » 15 Sep 2018, 13:24

If you could post links to the original images so I can check them, that would be useful.
TwitterSteamGitHubStack Overflow

The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
User avatar
RealNC
 
Posts: 1915
Joined: 24 Dec 2013, 18:32


Return to General — Displays, Graphics & More

Who is online

Users browsing this forum: No registered users and 5 guests