Just recieved 0.5ms AORUS KD25F

Everything about displays and monitors. 120Hz, 144Hz, 240Hz, 4K, 1440p, input lag, display shopping, monitor purchase decisions, compare, versus, debate, and more. Questions? Just ask!
Max_hz
Posts: 38
Joined: 25 Jul 2019, 09:46

Re: Just recieved 0.5ms AORUS KD25F

Post by Max_hz » 01 Aug 2019, 01:31

BlurBoss wrote:I wonder what monitor do they recommend? I have used BenQ XL2540, BenQ XL2546, Asus XG248Q, Asus PG258Q, Aorus AD27QD, Aorus KD25F each for a week. I do think that KD25F is the best 240 Hz monitor on the market right now. Picture quality of Asus PG258Q is nowhere near KD25F.

Again
They don't say it's a bad monitor actually it's a good monitor with some negatives so cannot recommand or reward it in relationship with the high price.

in short:

-The inputlag below 120hz is to high but they also say most gamers will not use this monitor below 120hz on the other hand you can choose a monitor with a inputlag-free G-sync scaler for this price
-Balance response time/overshoot not ideal
-High price €499

+Low response times
+Viewing angle and color
+Many handy tools-functionality

Indeed picture quality is good

This is the first 240hz monitor with the new AUO panel they have tested

wein07
Posts: 1
Joined: 16 Aug 2019, 15:22

Re: Just recieved 0.5ms AORUS KD25F

Post by wein07 » 16 Aug 2019, 15:26

Assuming the "Aim Stabiliser" is like ULMB, does it run on 240hz, or 144hz like the previous gen of 240hz monitors?

tinhhai123
Posts: 1
Joined: 04 Dec 2019, 21:45

Re: Just recieved 0.5ms AORUS KD25F

Post by tinhhai123 » 04 Dec 2019, 21:48

Up, same question. Does the "Aim Stabilizer" feature runs at 240hz??

BEZQ
Posts: 1
Joined: 06 Jan 2020, 22:45

Re: Just recieved 0.5ms AORUS KD25F

Post by BEZQ » 06 Jan 2020, 22:54

Hey guys,

I got the KD25F yesterday and yes, Aim Stabilizer (Blur Reduction Mode) runs at 240 Hz. So far I'm really happy with this monitor. But it's true, that the Input Lag is high at 60 Hz, even with the newest Firmware. So keep that in mind if you plan on using it with a console too.

@Chief Blur Buster

Can you please give me the best CRU settings for this monitor? I saw in another post, that you got this monitor too and I'd like to optimize it with the best settings. Unfortunately I really haven't figured out how to use CRU properly yet. All I did so far was increasing Vertical Totals to the max (1200) so it stays just under 600 Mhz Pixel Clock (599.04), because I read, that it improves the Blur reduction mode. I use Aim Stabilizer with this monitor btw so please keep that in mind if you can give me better CRU settings. I'll attach a screenshot of my current CRU settings.
Attachments
blur busters kd25f.JPG
blur busters kd25f.JPG (36.99 KiB) Viewed 397 times

dANii
Posts: 9
Joined: 11 Jan 2020, 08:09

Re: Just recieved 0.5ms AORUS KD25F

Post by dANii » 12 Jan 2020, 16:48

BEZQ wrote:
06 Jan 2020, 22:54
Hey guys,

I got the KD25F yesterday and yes, Aim Stabilizer (Blur Reduction Mode) runs at 240 Hz. So far I'm really happy with this monitor. But it's true, that the Input Lag is high at 60 Hz, even with the newest Firmware. So keep that in mind if you plan on using it with a console too.

@Chief Blur Buster

Can you please give me the best CRU settings for this monitor? I saw in another post, that you got this monitor too and I'd like to optimize it with the best settings. Unfortunately I really haven't figured out how to use CRU properly yet. All I did so far was increasing Vertical Totals to the max (1200) so it stays just under 600 Mhz Pixel Clock (599.04), because I read, that it improves the Blur reduction mode. I use Aim Stabilizer with this monitor btw so please keep that in mind if you can give me better CRU settings. I'll attach a screenshot of my current CRU settings.
Apparently this monitors input lag goes way up from 120hz and down, up to 30+ ms input delay at 60hz!! Is this with all new 240hz panels? Or only with the gigabyte one? How about the Acer XF252Q?

Dirty Scrubz
Posts: 5
Joined: 16 Jan 2020, 04:52

Re: Just recieved 0.5ms AORUS KD25F

Post by Dirty Scrubz » 16 Jan 2020, 05:01

At 240 Hz I didn't notice any input lag at all with the kd25f. Ultimately I returned it because the backlight strobing was too dark and I found 25" was a bit too small for me. I'm waiting on the BenQ Zowie XL2746S to release later this week so I can grab it.

Post Reply