Hi!
So I've noticed that my monitor (Samsung Odyssey G7) is skipping one frame in the frame skipping test unless i lower the refresh rate down to 190 Hz or lower. Is this normal behavior or is my unit faulty? Am i better of sticking with 240 Hz and the single skipped frame or should I lower my refresh rate down to 190 Hz?
Frame skipping at stock refresh rate
- Chief Blur Buster
- Site Admin
- Posts: 11806
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: Frame skipping at stock refresh rate
You have to rule out the browser first;senny22 wrote: ↑16 Nov 2023, 16:32Hi!
So I've noticed that my monitor (Samsung Odyssey G7) is skipping one frame in the frame skipping test unless i lower the refresh rate down to 190 Hz or lower. Is this normal behavior or is my unit faulty? Am i better of sticking with 240 Hz and the single skipped frame or should I lower my refresh rate down to 190 Hz?
(A) Is the browser saying "VALID" in green continuously
(B) There are no red frametime spikes at https://www.testufo.com/animation-time-graph.
If (A) is yes, and (B) is yes, then your firmware might be faulty, but you have to be 100% sure that the frameskipping is not caused by the web browser. It was used to successfully detect firmware-based frameskipping bugs in the past on some models -- see viewtopic.php?t=3598
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
![Image](https://blurbusters.com/wp-content/uploads/2024/01/BlurBustersCollectionBanner-750x80.png)
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!