https://www.reddit.com/r/Zowie/s/pB7l5v4QWR
ParkGGoki posted this on the Zowie reddit.
I found the original link: https://m.dcinside.com/board/mnt/742393
XL2566X+, 400HZ DYAC 2
XL2566X+, 400HZ DYAC 2
- Attachments
-
- RDT_20240530_1332183754363888878277745.jpg (618.45 KiB) Viewed 17569 times
-
- RDT_20240530_1330426289229203690849001.jpg (5.08 KiB) Viewed 17569 times
-
Supermodel_Evelynn
- Posts: 275
- Joined: 21 Aug 2022, 14:28
Re: XL2566X+, 400HZ DYAC 2
Nasty ugly bezels and TN panel 1080p YUCK
Re: XL2566X+, 400HZ DYAC 2
Looks like leaks were true again.
Re: XL2566X+, 400HZ DYAC 2
need a 1440p 24.5 inch atleast 240hz zowie, to consider buying a TN ever again
Re: XL2566X+, 400HZ DYAC 2
Video review: https://www.bilibili.com/video/BV1hrpMe4EvL/ (contains color-related, contrast, brightness, pwm test, no ufo and g2g)
Seems to be using WLED backlight? Service menu cannot be accessed with the usual way (like on the XL2566K)
Backlight strobing (DyAc 2) crosstalk pursuit shots that were shared:
Panel seems to be this: https://www.panelook.com/M241HTN01.6_AU ... 65686.html (new one, the XL2566K used M250HTN01.J)
Unstrobed (VRR off) / Sample & Hold @ 400hz (1440pps)
Seems to be using WLED backlight? Service menu cannot be accessed with the usual way (like on the XL2566K)
Backlight strobing (DyAc 2) crosstalk pursuit shots that were shared:
Panel seems to be this: https://www.panelook.com/M241HTN01.6_AU ... 65686.html (new one, the XL2566K used M250HTN01.J)
Unstrobed (VRR off) / Sample & Hold @ 400hz (1440pps)
Last edited by kyube on 24 Feb 2025, 20:12, edited 5 times in total.
evaluating xhci controller performance | audio latency discussion thread | "Why is LatencyMon not desirable to objectively measure DPC/ISR driver performance" | AM4 / AM5 system tuning considerations | latency-oriented HW considerations | “xhci hand-off” setting considerations | #1 tip for electricity-related topics | ESPORTS: Latency Perception, Temporal Ventriloquism & Horizon of Simultaneity
-
Chief Blur Buster
- Site Admin
- Posts: 12053
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: XL2566X+, 400HZ DYAC 2
Thanks for posting a video review!
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on: BlueSky | Twitter | Facebook
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: XL2566X+, 400HZ DYAC 2
There is some front leaning crosstalk at top of the screen. I wonder why that is. Normally new DyAc 2 doesn't do that.
Interesting how people don't know to reduce overdrive for lower refresh rates. AMA 17 is a bit too much for 540Hz, let alone 240Hz and below.
Re: XL2566X+, 400HZ DYAC 2
Here's a screenshot of the blurbusters utility with the new DyAc2 monitors.
Supposedly, the Persistence option works down to 10 (default was 16) & Crosstalk Area doesn't change anything (or changes it very minimally, according to the person who submitted the screenshot)
Hope this is of any use.
evaluating xhci controller performance | audio latency discussion thread | "Why is LatencyMon not desirable to objectively measure DPC/ISR driver performance" | AM4 / AM5 system tuning considerations | latency-oriented HW considerations | “xhci hand-off” setting considerations | #1 tip for electricity-related topics | ESPORTS: Latency Perception, Temporal Ventriloquism & Horizon of Simultaneity
Re: XL2566X+, 400HZ DYAC 2
Is motion clarity on XL2566X+ good? I'm also looking for OLED 24" with at least 400hz refresh rate.