Need recommandation isolation transformer

Separate area for niche lag issues including unexpected causes and/or electromagnetic interference (ECC = retransmits = lag). Interference (EMI, EMF) of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction latencies like a bad modem connection. Troubleshooting may require university degree. Your lag issue is likely not EMI. Please read this before entering sub-forum.
Forum rules
IMPORTANT:
This subforum is for advanced users only. This separate area is for niche or unexpected lag issues such as electromagnetic interference (EMI, EMF, electrical, radiofrequency, etc). Interference of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction (ECC) latencies like a bad modem connection, except internally in a circuit. ECC = retransmits = lag. Troubleshooting may require university degree. Your lag issue is likely not EMI.
🠚 You Must Read This First Before Submit Post or Submit Reply
Lanaxi
Posts: 7
Joined: 12 Jul 2026, 04:52

Re: Need recommandation isolation transformer

Post by Lanaxi » 13 Jul 2026, 12:17

I cannot reply via private message; there are restrictions for new users.

I also tried a high-end online double-conversion UPS, but it had no effect.

MontyTheAverage
Posts: 170
Joined: 11 Nov 2021, 06:39

Re: Need recommandation isolation transformer

Post by MontyTheAverage » 14 Jul 2026, 13:25

I have an isolation transformer. Didn't change anything. Don't bother

User avatar
Slender
Posts: 1844
Joined: 25 Jan 2020, 17:55

Re: Need recommandation isolation transformer

Post by Slender » 15 Jul 2026, 20:07

MontyTheAverage wrote:
14 Jul 2026, 13:25
I have an isolation transformer. Didn't change anything. Don't bother
im told that before but toroidal trans + ups with sine give some changes, which 99% of the members of this forum characterized as a "fix".

felhuy
Posts: 2
Joined: 03 Feb 2026, 21:55

Re: Need recommandation isolation transformer

Post by felhuy » 30 Jul 2026, 21:53

I bought a medical-grade MD-2000-U for $360, which was unusually cheap, I do not think it is currently available at that price. In my setup, it produced a very noticeable reduction in visual smearing.

However, I had to place it several meters away from the computer and connect it through a high-quality extension cord. Its toroidal transformer can radiate magnetic interference into nearby power supplies and other electrical equipment, and the manufacturer specifically recommends adequate separation. When I placed it right next to the PC, the result was worse rather than better.

edit: forgot to mention: this is the only direct electrical connection of my computer to the wall. Monitors, audio and ethernet are all pure fiber.
Last edited by felhuy on 30 Jul 2026, 21:55, edited 3 times in total.

Lanaxi
Posts: 7
Joined: 12 Jul 2026, 04:52

Re: Need recommandation isolation transformer

Post by Lanaxi » 01 Aug 2026, 04:45

I tried an Eaton medical grade transformer, 3 times more expensive than yours, I placed it 2m away but it didn't change anything.

Kyousuke
Posts: 26
Joined: 27 Jun 2025, 18:51

Re: Need recommandation isolation transformer

Post by Kyousuke » 01 Aug 2026, 06:30

I only bought an cheap Isolation transformer, a DIY of someone from online market and it didn’t worked. I’m glad people tried expensive ones too and have the same result as mine. I guess you shouldn’t waste money on it or find somewhere accept returns

Post Reply