(INTEL ONLY) An easy way to instantly lower input latency

[Mimi123]

Thanks for you reply. I have disable windows defender as well as tried multiple times with no avail. I am on w10 2H22

[sherifmagdy32]

Hello,

Thank you for your work, amazing stuff!

Although when running the script I get an error as enclosed. Do you have any idea where it comes from? My drivers are up to date

This fix for win 11 donot know if it will work on win 10 but worth giving a try
I had the same issue fixed it by enabling testing mode using this command donot forget to run cmd as administrator
"bcdedit /set TESTSIGNING ON"
restart then try again after you done disable testing by running this command
"bcdedit /deletevalue TESTSIGNING "

[sherifmagdy32]

Thanks for you reply. I have disable windows defender as well as tried multiple times with no avail. I am on w10 2H22

I see, well, I made another modification in the script, that should prompt you to apply the script in case you havent, to any system.

You can try getting it again.

---

As for the answer below, it could work but only if you were to use the script once. Because if you deleted the value after, it would not work, and since the script needs to be applied at every windows startup, then that would need to be kept turned off.

actually for some reason rw still works even after deleting the value donot know if it is glitched on my part or something happened that made it always work he will have to test for himself if the same happened it might work the same for everyone

[sherifmagdy32]

Thanks for you reply. I have disable windows defender as well as tried multiple times with no avail. I am on w10 2H22

I see, well, I made another modification in the script, that should prompt you to apply the script in case you havent, to any system.

You can try getting it again.

---

As for the answer below, it could work but only if you were to use the script once. Because if you deleted the value after, it would not work, and since the script needs to be applied at every windows startup, then that would need to be kept turned off.

actually for some reason rw still works even after deleting the value donot know if it is glitched on my part or something happened that made it always work he will have to test for himself if the same happened it might work the same for everyone

I see, I am probably wrong then, if RW only actually want to install the driver and after it's installed, doesnt matter anymore, then the protection only protect you of something that is not yet installed, if that is correct, then I suppose it make sense.

I might refactor the script to use that instead.

oh yeah you probably right keep up the good work

[Mimi123]

Thanks for you reply. I have disable windows defender as well as tried multiple times with no avail. I am on w10 2H22

I see, well, I made another modification in the script, that should prompt you to apply the script in case you havent, to any system.

You can try getting it again.

---

As for the answer below, it could work but only if you were to use the script once. Because if you deleted the value after, it would not work, and since the script needs to be applied at every windows startup, then that would need to be kept turned off.

I still get the same error and I am not surprise. Running HW got me the same message. Should be something else, as well for the test mode fix, it did not work either.

[Mimi123]

All 3 settings are disabled. I am wondering if it not directly a driver issue. If so how can I test that assumption?

[Mimi123]

I get the same error running RW

[Mimi123]

Runs perfectly! Thanks a lot for your reactivity <3

[howiec]

Your welcome. I wanted to fix that for some time, people reported problems in different os/builds, and different working fixes (who knows what they had in their system), now it should work in all of them without requiring you to do anything.

Nice work man!

But not sure why it's not working for me. I get the following msg:

Device interrupters amount is different than specified - 0 - No address from this device were IMOD disabled

Device: Intel(R) USB 3.20 eXtensible Host Controller - 1.20 (Microsoft)
Device ID: PCI\VEN_8086&DEV_7AE0&SUBSYS_7D281462&REV_11\3&11583659&0&A0
Location Info: PCI bus 0, device 20, function 0
PDO Name: \Device\NTPNP_PCI0005
Device Type: XHCI
Memory Range: 0x2100000-0x210FFFF
Interrupters Count: 0

[howiec]

Maybe that new controller version has different params, I dont know, nor I have the time to find out. You'd better ask this to someone like @BoringBoredom he provided most of the useful information.

No worries. I'm fine with just using the KX tool for now.

Thanks though!