Search found 7 matches

by Margusx
23 Jun 2020, 05:47
Forum: Display Overclocking
Topic: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz
Replies: 346
Views: 132102

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

My ZOWIE 2536 does only 200hz whay everyone ignoring this model or ppl not buy because not doing strobing at 60hz For this monitor on internet is so little information nobody say nothing about this model. Its seems that monitor not exsist it does perfect less issues then 2411z. 2411z is pretty much ...
by Margusx
13 Aug 2019, 11:36
Forum: Display Overclocking
Topic: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz
Replies: 346
Views: 132102

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

2536 zowie works tho also 220Hz need more investigation got 200Hz work with DP with dyac activated, used cru.
by Margusx
20 Jun 2018, 23:28
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Firmware upgrade using Linux tool, requires no hardware
Replies: 565
Views: 360617

Re: Firmware upgrade using Linux tool, requires no hardware

Got zowie 2536 since idk what flashchip its use its have v3 firmware once i get flashrom complied in linux i check. If chip have realtek then flashrom dosent support it i did dump on my 2411z might i do on 2536 also if flashrom eats that chip. edit its use unknown martonix chip this takes for while ...
by Margusx
11 Dec 2016, 05:48
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: [FIXED] Strobe Utility for BenQ not working with new Zowie
Replies: 6
Views: 3801

Re: Strobe Utility for BenQ is NOT working with new Zowie na

its should work if you use example 2411 with 2411z driver in windows both monitors same i use 2411 zowie driver on windows ofcurce utility scream not compatible switching back to z driver everything works its not brake anything just utility not understand windows driver. After edit on utility switch...
by Margusx
11 Dec 2016, 05:16
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Firmware upgrade using Linux tool, requires no hardware
Replies: 565
Views: 360617

Re: Firmware upgrade using Linux tool, requires no hardware

Can somebody dump Zowie 2411 firmware? if somebody have it. Or i ask friend todo this but its harder.
by Margusx
14 Nov 2016, 02:41
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: [FIXED] Benq Zowie XL2411 not detected
Replies: 14
Views: 20066

Re: Benq Zowie XL2411

Any chanche to get zowie 2411 firmware or its too early everybody can dump firmware easy on linux
by Margusx
12 Nov 2016, 07:13
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Firmware upgrade using Linux tool, requires no hardware
Replies: 565
Views: 360617

Re: Firmware upgrade using Linux tool, requires no hardware

Idk i flashed v4 fimware to 2 its feels mutch better because monitor came with v4 hopfully i can try later v5 of 2411 zowie version seems switched from v4 to v2 improved lot in input lag flashed under linux over dvi turned off in bios fastboot and turned legacy on and booted linux in legacy als chan...