Longstanding Floaty Aim Feel Issue Fixed with a Fiber Optic DisplayPort Cable...

[MK92]

Of course it didn't help, the problem is not a PC-->monitor signal as such, its your GPU / CPU data corruption while rendering and processing the information, so by the time the packet of information leaves MOBO to travel into the output (monitor), the data is already corrupted, so you can buy a DP cable for 500€ if you want and this won't help...this is literally like your car would have punctured tyre, and you would try to "fix" this by buying a new car windows.

If this actually worked for you, then you are among 1% of people which simply had damaged DP cable and therefore laggy data transfer, and now you think this is the entire fix for our problems.

[Slender]

its your GPU / CPU data corruption while rendering and processing the information, so by the time the packet of information leaves MOBO to travel into the output (monitor), the data is already corrupted

where i can read about it?

[MK92]

It's logical explanation, your monitor just displays what is rendered from CPU and GPU, so why would DP or HDMI cables be the problem?

+12V and +5V rails are not getting clean electricity, then the CPU and GPU activates their error-correcting protocol to prevent a system crash = output delay.

Now the funny part is where does this crap voltage comes from, because a good PSU, in combination with EMI-filtered surge protector, should easily handle dirty electricity...but we still get this problems, so apparently the electricity must by-pass the PSU and somehow enters the PCI slots from modem, monitor, speakers etc.

[Slender]

It's logical explanation, your monitor just displays what is rendered from CPU and GPU, so why would DP or HDMI cables be the problem?

+12V and +5V rails are not getting clean electricity, then the CPU and GPU activates their error-correcting protocol to prevent a system crash = output delay.

Now the funny part is where does this crap voltage comes from, because a good PSU, in combination with EMI-filtered surge protector, should easily handle dirty electricity...but we still get this problems, so apparently the electricity must by-pass the PSU and somehow enters the PCI slots from modem, monitor, speakers etc.

because battery mode didnt fix issue.
issue appers and dissapers at the same time ac / battery mode.

[MK92]

Not for me, if I run laptop on the battery its perfectly fine, but if I remove the battery and run with a power cord directly into the wall socket it works like crap.

[mustafaiq]

[[/i] I bought a fiber optic display port and the problem persists.

[ablemor]

That's because there's a chip at the end of the optical cable, + there can still be copper in it this way.

[Kyousuke]

[[/i] I bought a fiber optic display port and the problem persists.

same, I bought hdmi 2.1 optic cable.Except the problem actually fixed for 30-1 hour gaming, then the trauma came back like it had never gone away.

[xenvitsuFPS]

im writing this on mobile, hope replying works correctly lol

my houses electricity is fine. devices work OK and i don't get electricity INPUT LAG. but ever since i made the jump to 1440p, from 1080p, my mouse input has felt very icy in real games.

i would love to believe that im just a kovaak nab that cant aim in real games (trainable problem i only hit 39% lg in quake live lg vamp anyways), but i tried playing some bullshit roblox game on my dads laptop (hooked up to a 1080p tv because the laptop display is broken lmfao) and my ability to track was only stopped by the NORMAL non-electric input lag of his unoptimized and bloated win11 and the tv.

matching the speed of the target was easy and the only struggle was compensating for the lag, which i could do mostly.

like on the laptop/tv setup, the mouse didn't feel random or accelerated, just delayed. on my pc w the 1440p display, there is no delay, but it is slightly unpredictable.

my problem is a lot like OPs if we assume that his "acceleration" is just acceleration, and not laggy like my dads electrically good laptop.

i want to know that if i buy a shielded dp cable, my issue will be resolved. my old asus TUF served my aim perfectly fine and i was even capable of hitting ~53% typical acc as ultron in marvel rivals, dont play anymore tho so idk what i would hit now

shits genuinely so depressing, i see someone change directions in front of me on the 1440p monitor and my aim doesnt follow. best case scenario i react ~300ms later despite peaking a 210ms ballsheet, 160ms vrt, and having jade palace master scores