NEW PC and MOUSE and ONLY using the PC late at night

[f1ndus]

Maybe, who knows. Also those EMI meters values often don't correlate with symptoms, so it's not like your ultimate detector. It might be like that by accident in some cases, for instance if source of your problems also emits some interference this device can detect.

Interesting. I watched some youtube videos of people using this Emi meter and most of them were getting between 100-400mv of noise. I then looked up people on this forum who have used this meter and found that most people who used the device on this forum were getting between 500-1000+ mv of noise. Mostly 1000+ mv of noise. What are your thoughts on that? Most houses have clean electricity but there are those FEW houses with electricity issues, so what do you think?

20mv when pc on DOESNT fix issue.
stop waste time.

Lol idk yeah bro i hate to say it but nothing changed idk. I got a new motherboard, CPU, GPU, PSU and a new mouse and tested it at night with the greenwave filter. I got 64mv coming from the wall outlet with my PC on but this didn’t change anything at all. At this point i don’t think my issue is electricity anymore because i also tried ferrite cores and still nothing changed with the mouse input. My house has good grounding to everything is fine there. Everything on the PC quite literally works perfectly, it’s literally just the mouse thats bugging out and the keyboard to a SLIGHT extent. I think my issue is 100% software related cause i’ve ruled out hardware and electricity, these don't change mouse input in the slightest. I think i’m just gonna completely reinstall windows 11 on a usb offline and on a local account now because i think installing windows with a microsoft account on the internet is messing up the rendering of the mouse movement on the screen. I don’t know if its windows or if it’s something with how the microsoft cloud grabs your data causing some unknown glitch but i’m certain my issue is software related and either a windows 11 issue or a very unknown bug with my microsoft account.

after 8-9 years research, what everything i did to fix this issue, also with electricity, new grounding, new cables and breakers everywhere, most expensive devices to make my electricity brilliant clear and stable but still my mouse was heavy most of the time, desync, input lag, bad hitreg was still there.. even on another computers and monitors which i tried, i alwayse got this problem back.. after reinstal windows few hours its perfect but then i somewhing alwayse do and i re-active this problem, lol.. thaths my feelings after all years

[1nputlag34]

Interesting. I watched some youtube videos of people using this Emi meter and most of them were getting between 100-400mv of noise. I then looked up people on this forum who have used this meter and found that most people who used the device on this forum were getting between 500-1000+ mv of noise. Mostly 1000+ mv of noise. What are your thoughts on that? Most houses have clean electricity but there are those FEW houses with electricity issues, so what do you think?

20mv when pc on DOESNT fix issue.
stop waste time.

Lol idk yeah bro i hate to say it but nothing changed idk. I got a new motherboard, CPU, GPU, PSU and a new mouse and tested it at night with the greenwave filter. I got 64mv coming from the wall outlet with my PC on but this didn’t change anything at all. At this point i don’t think my issue is electricity anymore because i also tried ferrite cores and still nothing changed with the mouse input. My house has good grounding to everything is fine there. Everything on the PC quite literally works perfectly, it’s literally just the mouse thats bugging out and the keyboard to a SLIGHT extent. I think my issue is 100% software related cause i’ve ruled out hardware and electricity, these don't change mouse input in the slightest. I think i’m just gonna completely reinstall windows 11 on a usb offline and on a local account now because i think installing windows with a microsoft account on the internet is messing up the rendering of the mouse movement on the screen. I don’t know if its windows or if it’s something with how the microsoft cloud grabs your data causing some unknown glitch but i’m certain my issue is software related and either a windows 11 issue or a very unknown bug with my microsoft account.

after 8-9 years research, what everything i did to fix this issue, also with electricity, new grounding, new cables and breakers everywhere, most expensive devices to make my electricity brilliant clear and stable but still my mouse was heavy most of the time, desync, input lag, bad hitreg was still there.. even on another computers and monitors which i tried, i alwayse got this problem back.. after reinstal windows few hours its perfect but then i somewhing alwayse do and i re-active this problem, lol.. thaths my feelings after all years

Have you already tried calling your utility provider to have them check the connection between your home and the electrical transformer?

[Slender]

Update #2 so after updating all of the windows drivers to the latest drivers, the issue came back. So this is definitely a driver issue, i just have to figure out which exact driver is causing the issue and then roll back the driver.

LMAO 2026.....

i bet that will be happens in 2036

[f1ndus]

20mv when pc on DOESNT fix issue.
stop waste time.

Lol idk yeah bro i hate to say it but nothing changed idk. I got a new motherboard, CPU, GPU, PSU and a new mouse and tested it at night with the greenwave filter. I got 64mv coming from the wall outlet with my PC on but this didn’t change anything at all. At this point i don’t think my issue is electricity anymore because i also tried ferrite cores and still nothing changed with the mouse input. My house has good grounding to everything is fine there. Everything on the PC quite literally works perfectly, it’s literally just the mouse thats bugging out and the keyboard to a SLIGHT extent. I think my issue is 100% software related cause i’ve ruled out hardware and electricity, these don't change mouse input in the slightest. I think i’m just gonna completely reinstall windows 11 on a usb offline and on a local account now because i think installing windows with a microsoft account on the internet is messing up the rendering of the mouse movement on the screen. I don’t know if its windows or if it’s something with how the microsoft cloud grabs your data causing some unknown glitch but i’m certain my issue is software related and either a windows 11 issue or a very unknown bug with my microsoft account.

after 8-9 years research, what everything i did to fix this issue, also with electricity, new grounding, new cables and breakers everywhere, most expensive devices to make my electricity brilliant clear and stable but still my mouse was heavy most of the time, desync, input lag, bad hitreg was still there.. even on another computers and monitors which i tried, i alwayse got this problem back.. after reinstal windows few hours its perfect but then i somewhing alwayse do and i re-active this problem, lol.. thaths my feelings after all years

Have you already tried calling your utility provider to have them check the connection between your home and the electrical transformer?

everything is fine with that

[jterri]

Interesting. I watched some youtube videos of people using this Emi meter and most of them were getting between 100-400mv of noise. I then looked up people on this forum who have used this meter and found that most people who used the device on this forum were getting between 500-1000+ mv of noise. Mostly 1000+ mv of noise. What are your thoughts on that? Most houses have clean electricity but there are those FEW houses with electricity issues, so what do you think?

20mv when pc on DOESNT fix issue.
stop waste time.

Lol idk yeah bro i hate to say it but nothing changed idk. I got a new motherboard, CPU, GPU, PSU and a new mouse and tested it at night with the greenwave filter. I got 64mv coming from the wall outlet with my PC on but this didn’t change anything at all. At this point i don’t think my issue is electricity anymore because i also tried ferrite cores and still nothing changed with the mouse input. My house has good grounding to everything is fine there. Everything on the PC quite literally works perfectly, it’s literally just the mouse thats bugging out and the keyboard to a SLIGHT extent. I think my issue is 100% software related cause i’ve ruled out hardware and electricity, these don't change mouse input in the slightest. I think i’m just gonna completely reinstall windows 11 on a usb offline and on a local account now because i think installing windows with a microsoft account on the internet is messing up the rendering of the mouse movement on the screen. I don’t know if its windows or if it’s something with how the microsoft cloud grabs your data causing some unknown glitch but i’m certain my issue is software related and either a windows 11 issue or a very unknown bug with my microsoft account.

after 8-9 years research, what everything i did to fix this issue, also with electricity, new grounding, new cables and breakers everywhere, most expensive devices to make my electricity brilliant clear and stable but still my mouse was heavy most of the time, desync, input lag, bad hitreg was still there.. even on another computers and monitors which i tried, i alwayse got this problem back.. after reinstal windows few hours its perfect but then i somewhing alwayse do and i re-active this problem, lol.. thaths my feelings after all years

Lol yeah the problem came back for me again just a few hours after reinstalling windows. I don’t even know what to do anymore honestly lol