My Import HKC x3 23.5" PVA 144hz is here

Everything about displays and monitors. 120Hz, 144Hz, 240Hz, 4K, 1440p, input lag, display shopping, monitor purchase decisions, compare, versus, debate, and more. Questions? Just ask!
DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 18 May 2016, 01:41

Image

I already posted this on Hardforum, but I know most forums hate to offlink and keep traffic within their forum I'm starting my own thread here and also to keep a database for you guys.

Well guys, I went to some type of 3rd dimensional hell to get this but it's here :D
I'll leave some pics and impressions

I actually discovered this monitor here. Some people were trying to get it but didn't go through the hassle. I went through 5 stores and 4 of them were horrible for various reasons.

Specs: (These i tested and confirmed)

-Sharp Panel
23.5" 1080p
10 bit (well no source and gfx to confirm this but its stated)
VA panel 5000:1
144hz, 1ms
Adjustable height, tilt, portrait mode
-English menu was found after fiddling yay


The Hell

First I tried Shop China (as in the first thread of HKC x3). Their shipping rates seemed too unbelievable, but since their monitor price was a little higher than taomall, I figured it was added on. But seemed like a lot less hassle to just click, buy and wait. NOT! They told me that the item is fragile and won't guarantee its safety.


Second I tried Yoybuy.com . They told me through chat that they first said they could ship it to me , then they changed their mind after I paid it and said "Do you agree that this item is fragile and if it breaks you will pursue getting a refund ?"
I quickly cancelled that but I had to wait for my money back

Then I tried taobaoring. This time I went to the chat online and they just flat out said NO we will not ship the item. The price

The next one was Taobaocart. Well the price was high compared to the rest, but then again I thought no one would ship it to me. The man through email agreed so I went through the process. He would NOT choose any of the Tmall stores that I chose, but chose his. $250 for his choice. The DHL shipping (not including extra packing) and paypal fees, Dhgate fees, commission added up to $397. I tried to pay anyways, but my bank, Western Union and Paypal, DHGate all alerted me that night that this seller was a fraud and they didnt charge my bank.

Then I tried Yoycart. I just inquired and they said they would deliver, but their commission and service wasn't as good as what was already under way at the same time...

DOT DOT BUY. A Chinese only website. I thought I had no hope in working this one out! But praise God, it did.
I went through the tutorial on reddit and saw they had some decent reviews. I just linked the page to the top bar, hit add to cart and buy. The price of the Monitor base price was a very l ow $133usd. I then chatted thru the online chat and asked for English and they were nice that they could do that. They said they didn't have bubble wrap, but they could double box the item and find something to put inside. After I had clicked buy, It took me to pay via paypal (all in Chinese again) But thank God for Google translate page!

Then I received an email where I translated as they asked me to confirm that its a monitor and would need special care. I said OK and they had it shipped to their warehouse. I just went to the main page to get updates daily after this email. After 2 days they got it in and packed it up. They gave me the DHL quotes. Now take note that if u go on DHL yourself, it would cost $433 usd without a business account. Typically, these taobao sellers ask $162 for this size of package. However, DDB asked for $142 as a complimentary discount. A few hours later, i saw that it was 0% commission rate weekend and I would receive NO fees whatsoever.

They had this packed up and it asked me if i wanted special care extra box packaging. Usually this is an extra charge but they didn't ask for that either, and they absorbed both paypal fees for the 2 transactions.
I then received the Monitor 3 days later and the whole process of completion was 7 days.

For $277 I received a TN price panel for what is basically the younger brother to Eizo Fg2421
After almost getting swindled, I got a good deal. They even threw me in an Extended Razer mouse pad, those things don't go cheap here so that's nice.

Now, NVidia driver had reset the values to 16-235 and it looked horrible. I had changed that back in both areas of the Nvidia Control panel to 0-255 and we're doing good.

I don't know how to really calibrate and test this since i don't have the Calibrator . But if you want to guide me, please do. I'll be responsive :)

MORE PICS
(thumbnails, click to Enlarge)

Image ImageImage ImageImage Image ImageImage
Image Image
Image

User avatar
lexlazootin
Posts: 1251
Joined: 16 Dec 2014, 02:57

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by lexlazootin » 18 May 2016, 02:35

Looking at those specs it very well might be the same panel used in the 120hz Ezio monitor. You should be able to enable 10bit in Nvidia's control panel. Knowing these asian moniors, it might even be unlocked, you might be able to get more Hz out of it from overclocking :P

Nice buy! I love cheap asian monitors :lol:

DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 18 May 2016, 12:49

Oddly, it doesn't allow me to set 10bit color. Isn't there some other alternative program to Nvidia that will let me? My vizio can be set to 12bit though.
Also, this monitor is already unlocked. The Default on the panel is 120hz. It uses OD to get 144hz. I set it to 120 and it looks better in the UFO test slightly on the eyeballs are smoother. The ship looks like its shaking up and down. And I think there's less strain on my eyes, but I think I had too much caffeine yesterday. I can't confirm that until later.. But then most of the TN monitors are overdriven as well.
I have to make sure though.

DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 16 Jun 2016, 14:10

Ok, I have already posted this at hardforums, but for reference I will post my complete review here!
20160603085654.png
20160603085654.png (25.15 KiB) Viewed 17204 times
OK guys, I have used this monitor long enough to make a CONCLUSIVE review
Please read if you want some quality material to help you fall asleep at night!

Build Quality:

The monitor stand is weighted with some mixed metal ore and does has a hexa-triangular shaped base for support. It is not very wobbly.
Overall the quality of monitor materials and stability is somewhere in between. IT is definitely not typical cheap crap
I have found on budget Samsung screens, Benq or those monitors that fall over when someone farts as they walk by.
Oh, maybe that's only me?
oops.. I would say is pretty good, but just not as rugged as Dell or NEC. It wouldnt be good to fall off the table onto a hard floor.
But would I trust dropping a Dell ultrasharp ? No.
The monitor has excellent height adjustment, can be tilted forward or back. Finally, it and can be rotated vertically.
I think? Those 4 holes are for VESA mounts, but I haven't tested if they fit perfectly.
The ports seem strong enough for removal without much worry.

4/5

Warranty:

LOL, well won't apply since I got this import and through a work of art over a Taobao agent! If you ever use a taobao agent, just ask me
I went through 5 of them and they all tried to slice off my hand and rob me. I finally found one that does thousands of
good transactions a year and is very low cost. I took a big risk and would have had little recourse to get a refund, but my gamble
paid off since I scored a great monitor!

In China, you might have yourself a standard warranty. I think there's a slipcard thats written in all Chinese; I'm guessing that's
the warranty.

N/A

Gaming.. Continued:

The high res screencaps of DOOM 2016 and the uncompressed video just blew me away.
LINK:
With 5300:1 Contrast ratio, this is "THE MONITOR" for DOOM.

The amount of depth and detail is just staggering, you could look into the darks and stare and
still see further. This screen surely is far superior to the 842:1 (the avg contrast to most gamers) IPS screen I had to view this
and now I'm curious to how great this will look on OLED.

For Battlefield, the many shades of black and gray in LOCKER are a bit staggering. You will Find your enemy
hiding in the dark shadows and be able to track a running target pretty well on high tick rate servers.

For Games like Overwatch, the beautiful colors of the monitor represents this game as intended in its full glory.
Since the game uses a narrow contrast range with no blacks at all (darkest color is charcoal gray)
You will not find difference between this and a fast IPS screen. It is very obvious that this
that game is optimized for a variety of screen types, so even a bad panel will suffice. The game
is already smooth by nature, but adding 144hz on top of this makes the game surreal and breathtaking.

With little input lag and fantastic pixel response and Refresh rate, you will not find much advantage of getting a TN panel. IN FACT, if you were gonna spend <$300 on a local TN panel, i'd advise you not to and get this. Even uncalibrated, the colors look better than TN and you have the speed to match up.

While 4k and 1440p are nicer to look at, you will sacrifice either contrast, refresh rate or both. There is no one size fits all
gaming monitor.

4.5/5

Office work/typical usage/productivity software



Most people are moving up to 27" and higher res screens, so this won't really appeal to those
whose focus is strictly on that. However, after calibration, this screen is pretty comfortable to
view for many hours and is sharp with text. You still have enough space to
work with for FL studio, Photoshop and having 2 word docs side by side.
The last u pdates to these programs seem to have been optimized to run on 1080p. But 4k is simply better.
I did check, and FL STUDIO scales perfectly within 4k gui.

PWM drives me crazy, but I haven't found anything. The green/blue light is quite strong before calibration, so don't let that
confuse you --as that was a source of previous headaches.

You know whats neat? Is you can drag around any UI window and it's soooo smooth that you can still read it.
120hz is just unreal!

I would say 1080p is OK,
but nothing really exciting for pure productivity, as better options exist for size, resolution and
aren't dependent on contrast ratio or pixel speed.

4/5

Movies Continued:

You will find no flaw in watching a screen this nice for Blu Ray. This screen was perfectly built to all of its specifications.
In fact, TV reviews put the contrast ratio as the main weight in performance of the screen. The CR actually bests the top range
of all LCD tvs up to 2015. At an impressive 5300:1, only a few TVs will beat it. This year Vizio and Samsung came out with some superior
HDR capable screens that
do 6800:1 , but in the previous year Samsung topped out at 3000:1 and Sony 4900:1 for top models.
I have to agree that this is extremely important to cinema. The amount of depth, realism and detail makes for a far more
immersive experience. Even on a smaller screen, I felt more immersed watching Star Wars plasma bolts blinding my eyes,
whizzing through the ominous black sky.

The next important weight is Color. This monitor fits the standard specs for Blu ray. It encompasses 96% of the SRGB space/rec 709 and then some high range
greens for adobe gamma.

Fortunately, calibrating this screen twice brought this beast down to 0.42 deltaE!
While none of the calibrations from DisplayCal were bad,
SRGB mode came out least favorable, with BT 1886 as central and GAMMA 2.2 the best. Here I got the highest color accuracy and
contrast. The other two sacrificed a few % to either contrast darkness or color accuracy. I highly recommend using Gamma 2.2 in
Displaycal for i1 Dispaly Pro.

TV review sites then look at motion clarity and pulldown ability. The latter is handled by the software and video card, so the
screen itself has its hands clean of that. However, the monitor has no issue handling smooth motion when directly fed through PS3
watching Pirates of the Carribean. The fast pixel response of the monitor surely helped messy action scenes become easily trackable
by casual movement of your eye. A lot of TVs out there will blur this motion, but no problem at all for this screen.
The whole experience is buttery smooth.

ON the contrary, tech moves so fast that it brings this score down a bit. With cinematographers pushing more black depth into OLED
then with 4k and HDR, cinema gurus are already abandoning
the 1080p LCD spec.


4.2/5

Photography editing/Pic viewing

2016-06-12 22.59.43. 2016-06-12 23.00.16.

For Photography, its recommended to get a 27-30" Screen, or even bigger with a high PPI and a
glossy coating. BUT the color accuracy and contrast helps greatly to offset these limitations.

With DeltaE 0.42E (recalibrated 6/11/16).
This brings this screen down slightly more accurate than my Davi 24" IPS which uses the same
panel as the apple cinema circa 2010.

The contrast really does this screen a giant favor. Photos viewed are very rich with depth
and saturation. Side by side, certain pictures look fantastic on the HKC but are really washed
out garbage on the IPS screen(s). Even brighter pictures
seem to benefit. I used a variety of pictures 4k and 1080p, from Gratisphography and 3
k wallpaper sites.
The range of dark values of all colors made most of the pictures pop out of the screen. There is a lot
of depth that I've never experienced before outside of OLED and CRT.

With this color accuracy AND contrast, you will find litle advantage of buying any of the 24" 1080p Ips screens
on the market

OF course, there will be absolutely no advantage of hunting down any other VA panel, as it tops
all other VA monitors for contrast ratio and color accuracy.

4.2/5


Pros
---
+Highest contrast ratio ever tested (and I had the honor lol). 5312:1
+Very high color accuracy, IPS killer <0.42 DeltaE
+Might be better than any TN in almost every way.
+Very fast and stable 120hz, buttery smooth games
+Very smooth film motion, especially action sequence and particles
+No noticeable lag, competition ready.
+Fully adjustable stand, tilt, height and rotation
+Good connectivity: DP, HDMI, DVI, Audio for a soundbar, speakers.
+Works fantastic for consoles, HDCP ready.
+Eizo Fg2421 altenative that addresses its weaknesses.
+No dead pixels
+Company is reputable in China
+Overall has all the pros of TN/VA and IPS
+Good price

Neutral
----
-Light AG coating
Most people like this, but it is a bane to me who sees a dry sandy film grain texture on everything and prefers
crystal clear coats. Reflections are not an enemy but now is ambient diffused light to
rob picture quality.
-Very loud Chinese gamer design; red n black will match MSI or ASUS. Not crazy about the
mid sized bezel and round osd
control panel.

Cons
---
-Pain in the butt to ship here. Used a Taobao agent.
-Poor factory calibration, just awful and almost resold it!
-Poor OSD functions: If using a Factory preset, it is defaulted to the first each time monitor sleeps/off
-144hz OD on my panel caused ufo test to vibrate/judder vertically, set to 120hz fixed this.
-No Gsync/Freesync/ULMB or 240hz black frame strobing from Eizo. But do you need it? I haven't
seen tearing once.
-A bit more narrow viewing angles than IPS and narrower than the best VA panels but its not bad.
Still better than any TN, just not as good as IPS.
-Probably no warranty overseas

Thoughts..

You can't have everything. If you were to raise the scores of movies and photos,
that would require
4k+ HIGH PPI and HDR. But there is no monitor out there in LCD Land that will also give you
high refresh rate/low lag AND very high contrast levels AND high color accuracy. The 4k monitors
out there only do about 800:1 contrast ratio. Then there's the plethora of 2560x1440 27" monitors
that are everywhere, but they do not scale well at 1080p material and aren't resolved enough for 4k
and do not exhibit the high contrast ratio.

4k is the new standard that won't go
away for Hollywood, so it's really a moot in between step. So a 27" 1440p scren wouldn't be "Better"
But simply a sidestep.

For 1080p LCDs, I also looked at the Dell U2417HJ, which has superior low inpug lag at <5ms smmt fast
pixel response, but also the best tested IPS for contrast ratio at 1228:1. However, you do not get
high PPI or glossy screen for photos here either, and the HKC and Eizo still shrug at that contrast ratio. I almost
bought that screen, but the HKC was already in progress so i just went ahead with it.
It also is just a 60hz monitor. The HKC seems like it has beaten Eizo in battle here, and is less
than half the cost so now that is no longer the best option.

This seemed like the best alternatives are few, mainly being sidegrades.
You will sacrfice
something, unless you wish to pay an arm and a leg
for the upcoming God of all monitors, the DELL 4k 120hz 0.1ms 30" OLED.
This indeed will make no compromise.

What changes I'd like to see on revisions:
-FIX the OSD! Really, this is what makes you look like an ordinary, sweat shop Chinese company.
The settings don't stick once the monitor powers off on standby. Thank God for calibrations
that do stick!
-Try to make at least "useable" pre set calibrations for people who aren't gonna buy a calibrator ever.
-Fix your manual and print it out in different languages.
-Slim down the bezel and use a nicer osd control pod like Dell.
-Consider using low reflective 3H glass similar to Plasmas.
REALLY consider exporting after the fixes are in place. Gamers are dying for a monitor this nice


I don't think t hese revisions will cost a great deal of money, you still gotta pay people's salaries. But no
excuse for basic quality!

I went well above and beyond what a normal person would do when buying a monitor. I bought an entirely
unknown brand in the US, went through the hassle of navigating and registering on a complicated Chinese website
and communicating with agents of broken English and more google translate. I then had it shipped for nearly the cost
of the monitor. BUT you know, shipping and export fees are added to monitors in the US anyways as hidden charges?
For example I paid $277 total for this monitor, a TN panel would cost around $300 after taxes but the Eizo FG2421, which is inferior
would cost you $610 after taxes. I then went through the trouble of buying a calibrator and learning how to calibrate my screen.
This is something else that 99% of monitor and TV owners will never do. The Chinese pay only a small fraction for monitors over there!
You pay for advertising and marketing as well here.

So I would be really surprised if one of you guys who aren't living in China decide to buy one! Post your thoughts if you do!

GAMING: 4.5
MOVIES: 4.2
Office work/typical usage: 4
Photography usage: 4.2
Build Quality: 4/5

RECOMMENDED: 4.4/5

Price at time of review: $133usd, +$142 to ship to USA. Got discount and paid 0% fees/taobao agent
Attachments
20160603090249.png
20160603090249.png (26.1 KiB) Viewed 17204 times

garryanderson
Posts: 6
Joined: 29 Jun 2016, 23:28

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by garryanderson » 30 Jun 2016, 01:18

Man, thank you very much for this grateful review. I live in China now but I'm actually a foreigner who's not that good at Chinese. Even on Chinese review sites they just mention the color and other stuffs, not mentioning any other stuff like the 144Hz or 120Hz performance, blur, etc. Have not checked other reviews though, but I think it would be very hard to find even a chinese review of this monitor this detailed! I'm really, really on the verge of buying this Chinese monitor. I have a monitor already, but I plan on upgrading and it's just the right time because I can sell my old monitor to someone now (someone's buying a new monitor, soon, I can sell it to him secondhand). I was afraid of the PVA panel performance, because basically most sites wrote PVA as being that bad in response times, causing terrible ghosting. The best gaming monitor, that Ezio you mentioned IIRC is also a PVA panel right? 'the best' couldn't have that bad of input lag and other weird pixel response issue. But when you said 120Hz looked nice and the texts are very clear when you were dragging them, I guess it's safe to say that the pixel response time would be minimum. I'm mainly buying this monitor for fast-paced gaming, specifically osu! (http://osu.ppy.sh). I figured out when I turn down my resolution and overclock my monitor from 60Hz to 75Hz it made a noticable difference to overall smoothness, and well, made me play better if not a placebo. (I really believe it's not a placebo tho). Couldn't really care more about color accuracy over my current monitor (another typical chinese monitor 1080p@60Hz IPS(?) Tuopu 240E) but since you mentioned that this monitor is a beast I guess that's another huge plus.

I can get the monitor without the international shipping cost :lol: at 949RMB, that would be 143USD (on promotional days it could be 899RMB), but anyways, perhaps that's the thing to envy about me xD

Well anyway my main purpose to register here is to thank you for the detailed review, it really helped! I think I am about to buy one soon, and I'll keep updating! Thank you!!

DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 30 Jun 2016, 01:37

Hey Garry! I'm glad u found it useful :D
I was just learning that some other people bought the monitor already due to my review!

I put all the details here. Remember that a lot of Miscaluations happened there, so I didn't put them in Blurbusters. I was wrong about a few things but corrected them on the way. This is a great screen!

I paid $277.00 total for this (133 +144 shipping) Better than any 290.00 Benq TN panel lol

https://hardforum.com/threads/my-hkc-x3 ... n.1899812/

garryanderson
Posts: 6
Joined: 29 Jun 2016, 23:28

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by garryanderson » 30 Jun 2016, 18:14

So you have another forum over there with more discussion eh, well anyway I ordered the monitor already. It's a little bit sad to know that the monitor is just 6bit + dithering even though they advertise them as 10bit which can produce 1.07B(IIRC) colors. I have always been not a fan of resolution trickery (iPhone 6(S) Plus 1242x2208 downscaled to 1920x1080, Samsung's PenTile pixel arrangement across Galaxy S and Note phones causing one pixel to only have RG or BG subpixels, and of course also dithering (where I read that if a uniform color is shown on a big scale (taking up many pixels)) the neighbouring pixels will help with the color. For me I think pixels must stay true to their intended purpose : to serve as individual dots. So I really value '1:1 pixel arrangement' here. If i don't have misunderstanding of what they call dithering, 6-bit made the panel faster (to achieve higher refresh rates), but with 6-bit you will need more than 1 pixel if you want to display more than 262K colors. But another thing I found out was BenQ XL2411Z and Asus VG248QE with all their glory would also still have 6bit dithering. BenQ XL2411Z is around 1999RMB (300USD) here, also Asus VG248QE is around 2499RMB (376USD)!! I checked the price on US online shopping sites and the VG248QE is supposed to be around 230USD! I wonder why the prices are so inflated even when they don't need to pay the shipping cost to the US (it's likely manufactured here in China right?). I was previously probably aiming for BenQ and Asus but probably won't buy them because I for myself wouldn't be willing to pay that much for something that's supposed to be cheaper... Before reading your review AND if the prices here were to be the same as the US I might have considered the Asus before, because the brand is way well too known. Well I guess I got no choice but to buy the HKC here.

Speaking of the 6bit + dithering, I wonder why in the world with technology advancing at this rate would they still need trickery to produce 16M colors with 144Hz. I know there might be some other more expensive panels with true 8bit 144hz BUT also have higher pixel response time... But I don't really understand why the market does not have that big of a need of 144Hz monitors, we have been stuck with 60Hz since ages ago and I'm surprised (almost) everyone is actually satisfied... Because 144Hz demands are not mainstream enough right now (low demand), I guess manufacturing is done at a smaller scale, which in turn makes everything become a little bit more expensive. If the demand of 144Hz monitors rise I would suspect the prices would have gone down and at the previous price point we would have gotten a better monitor. I'm guessing it's something like SSD, IMO maybe it's not the prime time for 144Hz monitors yet... Or probably there would never be a prime time :D . To know that even the well known brand monitors also make that shitty (?) compromise I guess it's safe to assume the chinese companies here aren't really doing worse.

What about the Overdrive in this monitor? I heard OD can add to some ms of input lag... In my game osu my graphics card would pull out 500-2000fps (it's indeed quite light) but most of them goes into reducing input lag, by 60fps vsync frame is probably around 16.7ms late, which can be cut down to 1ms ish if you have 1000fps, plus frame data transfer over cable, plus processing in the monitor, plus pixel response time. I think I managed to cut down input lag by just reducing the resolution which in turn makes the frame data smaller, which in turn reduces the frame data transfer time (?) its like I feel the mouse is way more connected to actual hand movement on lower resolution (I did make the DPI adjustment). I don't really know whether this is a placebo or not though, but I think over a 7.92Gbit/s DualLink DVI it would take at least 1920*1080px*24bit/px*(/frame) = 49.77Mbit/frame which in turn, one full frame takes at least 6.284ms to transfer, meanwhile with 1024x768 it's just 2.38ms (?) I've been thinking this thing over and over but I might be wrong here... I think my monitor only supports Single link DVI since it's a budget monitor and capped at 1080p60 so it would be around 12.568ms for a full FHD frame (4.72ms for 1024x768)? Considering I had a nice bump going from 125Hz to 500/1000Hz mouse (from 8ms to 2-1ms) I am thinking of a similar improvement if I use a lower res. So I hope with the new monitor the OD doesn't mess up my experience and will just add a max of single digit ms of input lag...
It seems like I am talking like a pro here but I seriously do not really understand the concept of video bandwidth over links and scan rates and framebuffer and stuff so, please correct me or give me your opinion here xD

I'll keep you updated with my opinions when the monitor arrives and after some time tinkering around... Probably I will be trying doing 144Hz frameskipping with DP cable and (stupidly?) look for the 10bpc option in the nvidia control panel lol :lol: and I'm hoping that I could also help add some useful infos for potential buyers

DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 30 Jun 2016, 18:42

Hey Garry,
Where do you see 6 bit+dithering? This monitor is 8bit+dithering. Surely it is not a true 10 bit (only some pro panels are)
but it's not a 6 bit.

Actually input lag doesn't feel like there is any at all. I discussed that on the other forum already.
No one replied here so I decided to continue my discussion over there.

garryanderson
Posts: 6
Joined: 29 Jun 2016, 23:28

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by garryanderson » 01 Jul 2016, 22:31

I thought it was mentioned in your other thread at Hardforum?
On the third page of the forum, at around the middle of the page, KG-Prime90 posted something like this
This may confirm that the panel in the X3 is indeed LK235D3HA0S http://www.itocp.com/bbs/data/attachmen ... xj44g8.jpg [Post #5 - chenxq0501] 为游戏而生,HKC X3专业游戏显示器评测 - 玩家堂
So then it would be an 8 bit panel ( 6bit+frc ) not 10 bit, and at least 3D capable - apparently not enabled on this monitor or whatever, and not the panel found in the Foris.
Well, I don't really know but later in the discussion I don't find the counterargument for that though, so I assumed it was 6bit+FRC... I truly hope it is a 8bit+dithering though.

DanzoMeteor
Posts: 12
Joined: 17 May 2016, 17:19

Re: My Import HKC x3 23.5" PVA 144hz is here

Post by DanzoMeteor » 01 Jul 2016, 22:37

^ No, he's just assuming. The Foris and this panel are completely different. They are similar, but there are enough differences that you have to recheck things .A lot of that thread is assumption, so I just left the most clear tested facts here

Assumptions/unclear
These are items that can't be tested with my equipment

Pwm
bit depth
Frame skipping (refresh rate is 120hz at least, but unsure if 144hz is genuinue).
Input lag
Pixel response time

For sure
Contrast ratio (better than advertised) -300:1 better
Color accuracy (better than advertised)

But let's say it ends up 6bit +FRC, well anyways TFTcentral makes it clear that the human eye can't tell the difference between 8bit and 6bit frc. Well that's what's claimed..
But surely it is not 10bit and that's a false claim. You can't enable it, but for my Vizio tv u can enable 12bit

Post Reply