Calibrated with i1 Display Pro + ArgyllCMS + DisplayCAL for 6500k.
-
-
First set as following:
Color Temperature -> User Color
Red 98
Green 95
Blue 100
Then apply ICM Profile in Novideo_sRGB to clamp Gamut and Curve correction.
-
-
CRU Timing and Strobe Utility settings for 60Hz.
QFT is created with 180Hz using "Native PC" Timing, then changed to 60Hz using Vertical Total Calculator.
Personally all my monitors are calibrated for 60nit which is equal to Strobe Pulse Width of 10.
-
XG2431 - Calibration ICM and Settings
- James Freeman
- Posts: 30
- Joined: 11 Jan 2014, 09:06
XG2431 - Calibration ICM and Settings
Last edited by James Freeman on 21 Oct 2024, 11:40, edited 4 times in total.
- James Freeman
- Posts: 30
- Joined: 11 Jan 2014, 09:06
- James Freeman
- Posts: 30
- Joined: 11 Jan 2014, 09:06
Re: XG2431 - 60Hz Calibration ICM and Settings
Very hard to capture with a phone.
-
-
- James Freeman
- Posts: 30
- Joined: 11 Jan 2014, 09:06
Re: XG2431 - 60Hz Calibration ICM and Settings
Using the ICC profile I've shared in Novideo-sRGB, black shades are nice and even without crushing.
Again, extremely hard to photograph with a phone.
- -
Can't say my sample has any edge light bleeding, just the typical IPS glow.
-
Again, extremely hard to photograph with a phone.
- -
Can't say my sample has any edge light bleeding, just the typical IPS glow.
-
Re: XG2431 - Calibration ICM and Settings
Nice!
I've tested whole range and listed all the optimal settings in a spreadsheet. It's from the review that never got finished. If anyone is interested here ya go:
XG2431 Strobe Utility Optimal Settings Spreadsheet | HTML View
After QFT
Before QFT (out-of-the-box) Images are a bit compressed but it's fine for demonstrating differences in top-bottom crosstalk. Please view in full resolution.
*For the purposes of this test special permission was granted by Blur Busters to Discorz to use the UFO in a non-Blur Busters test program. The UFO is a trademark of Blur Busters.
I've tested whole range and listed all the optimal settings in a spreadsheet. It's from the review that never got finished. If anyone is interested here ya go:
XG2431 Strobe Utility Optimal Settings Spreadsheet | HTML View
After QFT
Before QFT (out-of-the-box) Images are a bit compressed but it's fine for demonstrating differences in top-bottom crosstalk. Please view in full resolution.
*For the purposes of this test special permission was granted by Blur Busters to Discorz to use the UFO in a non-Blur Busters test program. The UFO is a trademark of Blur Busters.
