I only saw g2g. But it was an improvement over existing 600hz panels so that's something at least.
Zowie Dyac3 + New Monitors Rumor
-
petight
- Posts: 25
- Joined: 14 Dec 2023, 14:32
Re: Zowie Dyac3 + New Monitors Rumor
24G2ZU - XV252QF - AW2524HF - XV242F - AG246FK6
-
betonKruglosuTotchno
- Posts: 42
- Joined: 22 Feb 2023, 13:48
Re: Zowie Dyac3 + New Monitors Rumor
The eSports player I know just posted that Benq got him to test Dyac 3. I wonder if it's similar to Pulsar.
-
MSIfanboy
- Posts: 174
- Joined: 15 Apr 2022, 13:51
Re: Zowie Dyac3 + New Monitors Rumor
what i have noticed with zowies/monitors in general, if you bump up the brightness with black equalizer and lower the gamma, it ruins the percieved clarity, contrast ratio is a percieved clarity also, and heaps of people will not lock there fps to the refresh rate, or dont even get enough fps to match there refresh rate
-
DanDare
- Posts: 8
- Joined: 28 Feb 2026, 07:38
Re: Zowie Dyac3 + New Monitors Rumor
My wishlist :
360hz or above
1440p
<0.5ms screen persistence
<3ms of latency.
We have plenty of monitors which do 3 out of 4 of these and none that do 4/ 4
360hz or above
1440p
<0.5ms screen persistence
<3ms of latency.
We have plenty of monitors which do 3 out of 4 of these and none that do 4/ 4
-
betonKruglosuTotchno
- Posts: 42
- Joined: 22 Feb 2023, 13:48
-
Supermodel_Evelynn
- Posts: 296
- Joined: 21 Aug 2022, 14:28
Re: Zowie Dyac3 + New Monitors Rumor
Unless DYAC 3 supports VRR then it's dead on arrival.
We have Pulsar now, everything else is dead now unless it supports VRR
We have Pulsar now, everything else is dead now unless it supports VRR
-
MSIfanboy
- Posts: 174
- Joined: 15 Apr 2022, 13:51
Re: Zowie Dyac3 + New Monitors Rumor
i have asus pulsar, i went back to my zowie, locked at 300fps/custom 300hz, amazingSupermodel_Evelynn wrote: ↑28 Jun 2026, 21:22Unless DYAC 3 supports VRR then it's dead on arrival.
We have Pulsar now, everything else is dead now unless it supports VRR
though i am waiting for 120hz improved ulmb2 mode for the pulsar
- kyube
- Posts: 934
- Joined: 29 Jan 2018, 12:03
Re: Zowie Dyac3 + New Monitors Rumor
I still don't know why they're hesitating in implementing ULMB2 properly on 240Hz & 360Hz, akin to the PG27AQN.
Ridiculously low effort implementation...
I have to address the meme in the room though.
Tell me that you don't know how backlight strobing works without telling me that you don't:
Supermodel_Evelynn wrote: ↑28 Jun 2026, 21:22Unless DYAC 3 supports VRR then it's dead on arrival.
We have Pulsar now, everything else is dead now unless it supports VRR
evaluating xhci controller performance | audio latency discussion thread | "Why is LatencyMon not desirable to objectively measure DPC/ISR driver performance" | AM4 / AM5 system tuning considerations | latency-oriented HW considerations | “xhci hand-off” setting considerations | #1 tip for electricity-related topics | ESPORTS: Latency Perception, Temporal Ventriloquism & Horizon of Simultaneity | good lcd backlight strobing implementation list | display vs gpu scaling
-
MSIfanboy
- Posts: 174
- Joined: 15 Apr 2022, 13:51
Re: Zowie Dyac3 + New Monitors Rumor
27 inch and 24.1 inch, and super expensive, i like zowie, but these comparisons they make are so bad, always super low quality aswell, the person who makes these, needs to be fired asap
- Attachments
-
- Screenshot 2026-07-02 230814.png (829.87 KiB) Viewed 401 times
-
radeko
- Posts: 59
- Joined: 04 Apr 2024, 19:04
Re: Zowie Dyac3 + New Monitors Rumor
AOC Agon Pro AGP257FT 1000hz
BOE on the panel, which also boasts a near-instantaneous 0.2ms gray-to-gray (GtG) response time via BLMB (Boe Low Motion Blur)
LG C1 55"
