Zowie Dyac3 + New Monitors Rumor

[betonKruglosuTotchno]

Should i upgrade to the 25" dyac3 1440p zowie from the xl2586x+?

I play mainly pubg and get about 400-550fps on that monitor.

Main benefit of all rolling strobing technology including Pulsar/Tmoc/DyDs is:
- reduced crosstalk near the edges of the image
- maybe also brightness, look it up yourself
- maybe also VRR support

But at the same time you won't be able to run at 1080p without loss of sharpness and refresh rate is lower (I'd not say that it matters for PUBG).

[kyube]

RTINGS seemingly has a review up for the XQ2566X
XQ2566X @ 360Hz @ DyAc3=High


Here's the XL2566K @ 360Hz @ DyAc+=Premium, in comparison.


Note: RTINGS uses 1920px/s for their pursuit photographs

Based on Chimolog's XL2566K review, DyAc+=Premium targets a ~16% duty cycle.
This implies a pulse on time of ~0,444 ms
I would argue that this isn't correct, as this would imply the RTINGS photograph to be clearer than it is.
TFTCentral's XL2566K review mentions a 0,625ms pulse on time. This would imply a 22,5% duty cycle, which would make more sense given the slight blurriness of the pursuit photograph of the 66K.

This means that DyAc3's duty cycle lies within the 22,5% & ~30% duty cycle range.
Which means that the pulse on-time is somewhere between 0,7–0,8333 ms (1200-1400Hz effective motion clarity)

Of course, we're at the mercy of RTINGs focus for the pursuit being correct...

[betonKruglosuTotchno]

I wonder why ghosting/crosstalk is so strong, it's just a 360 Hz TN panel, it should not have any ghosting. Or is it due to backlight bleeding of backlight zones?

[betonKruglosuTotchno]

Can you post pursuit photo from Pulsar monitor too? I do not have access to Rtings.

[betonKruglosuTotchno]

Actually, this review shows everything: https://tftcentral.co.uk/articles/nvidi ... -reduction
There's brightness graph which shows very well that there's just too much zoned backlight bleeding which causes some cross-talk.